Barrel Spares  There are 29 products.

Everything the home brewer needs as a spare for use with home brewing barrels.

per page

Barrel Cap 2"  & Pin Valve 2" Barrel Cap Complete with BRASS PIN VALVE to fit the basic barrel. This cap takes the small 8gram gas bulbs. Ideal for use with the Co2 Bulbs and bulb holder purchased separately.

£ 12.99
0 Review(s)

4" Barrel cap complete with Stainless Steel S30 valve 4" cap fitted with a (STAINLESS STEEL S30 VALVE) combined pressure relief and CO2 injection valve which uses the large S30 refillable CO2 cylinder for home brewing. These caps are supplied either as a black or green cap depending what the manufacturers have in stock

£ 12.99
0 Review(s)

The 2" diameter barrel cap comes with a rubber sealing washer to fit the brewers economy pressure barrels and is made from a food grade plastic moulding.  The barrel cap needs to have a valve; you can choose to have either the S30 or Direct Drilled (sparklets) valve PLEASE NOTE. THESE CAPS MAY BE SUPPLIED IN DIFFERENT COLOURS DEPENDING WHAT THE...

£ 3.50
0 Review(s)

2" Barrel cap (Brass S30 valve) 2" cap fitted with a (BRASS S30 VALVE) combined pressure relief and CO2 injection valve which uses the large S30 refillable CO2 cylinder for home brewing. 

£ 10.79
0 Review(s)

2" Barrel Cap complete with STAINLESS STEEL PIN VALVE to fit the basic barrel. This cap takes the small 8gram gas bulbs. Ideal for use with the Co2 Bulbs and bulb holder purchased separately.

£ 10.79
0 Review(s)

4" cap fitted with a (BRASS S30 VALVE) combined pressure relief and CO2 injection valve which uses the large S30 refillable CO2 cylinder for home brewing. These caps are supplied either as a black or green cap depending what the manufacturers have in stock

£ 12.99
0 Review(s)

Cap Spanner for King Kegs 4 inch A handy device for screwing up and loosening off your 4" vent cap which fits the King Keg barrelUsing this spanner stops the old way of having to squeeze the keg between your legs and having to use all your might to try and loosen the cap. So much easier it has to be seen to be believed.

£ 2.95
0 Review(s)

King Keg cap 4 inch A king Keg 4-inch cap with a hole for the valve and an O ring.

£ 3.95
0 Review(s)

King Keg 4" cap & S30 gas valve S30 valve Brass/Stainless Steel  Used with S30 CO2 gas cylindersSpare washers, rubbers and 'O' ring available separatelyDoes not have a centre pin in valveNote this fitting is not suitable for use with sparklet gas bulbs

£ 12.99
0 Review(s)

Black Plastic Backnut for Drum, Quickserve and Fermenter TapsThis backnut is a replacement nut that fits most of the homebrew taps

£ 0.75
0 Review(s)

S30 Bulb Holder With Steel Thread For 8g CO2 Bulbs-sparklets type An ideal solution to what was once a problem- insert a stainless steel thread to the inside of the plastic C02 gas bulb holder for more stability. This gas bulb holder works with all genuine Hambleton Bard S30 pin valves.Pin Valves are for use with the 8 gram(sparklets type)gas bulbs not to...

£ 3.49
0 Review(s)

King Keg Float Float replacement for King Keg & Balliihoo Premium - Top Tap Pressure Barrels This New Improved Style Float Has An Easy Tap Plug (With O-Ring Seal) And A Swivel At The Float End.This float is also suitable for any barrel with a standard size taps.For the float system to work accurately, the barrel must be pessurised

£ 3.99
0 Review(s)
Showing 1 - 12 of 29 items