Warning: Last items in stock!
89 Item Items
For use with Quick serve barrel tap, drum tap and wide neck fermenter tap.
Black rubber washer to seal the fit between a quick-serve or drum tap and pressure barrels, fermenters or 25L calibrated brewing bucket
Valve Washer 3mm purple for CO2 Valve The purple washer is in the centre of the image. Purple washers are the small washers that fit on the bottom of the CO2 valve. They allow CO2 into the barrel from pressurised CO2 containers like the S30 or the CO2 bulbs. Purple washers do not let any gas out the same way.
Valve Washer 8mm brown for King Keg Barrel A replacement rubber valve.This brown rubber valve is for the king keg barrel and other barrels fitted with a combined safety and inlet valve.This washer replaces the clear washer supplied with some S30 valves.
Barrel Cap 2” with a hole for home brewing These are 2-inch barrel caps with a pre-cut hole to accommodate CO2 valves. The caps fit the standard barrels with a 2-inch neck. They can also be adapted to use as pressure kegs for a home bar.
Tap & Back Nut for Home brew Barrels A large black lever tap with back nut. The tail is slightly longer than the standard lever tap. However, the thread fits standard barrels and drum fermenters. It is also compatible with the King Keg and King Keg float. It has a tapered, barbed spigot for connecting tubing to the tap outlet.
S30 Valve Stainless Steel CO2 injection and Combined pressure relief valve for use with S30 CO2 cylinders. A replacement Stainless Steel S30 Valve for King Keg and standard pressure barrels for use with Hamblebard S30 gas cylinders.
Pin Valve Stainless Steel CO2 A replacement Stainless steel valve for home brew pressure barrels using the Sparklets gas bulb system. This pin valve is a replacement valve that will work with most plastic pressure barrels A pin valve with a piercing pin which combines inlet and relief (safety) functions for single hole 2" or 4" caps. This valve takes the...
Pin Valve BRASS CO2 A replacement BRASS valve for home brew pressure barrels using the Sparklets gas bulb system. This pin valve is a replacement valve that will work with most plastic pressure barrels A pin valve with a piercing pin which combines inlet and relief (safety) functions for single hole 2" or 4" caps. This valve takes the 8-gram gas charges
King Keg 4" cap & S30 gas valve S30 valve Brass/Stainless Steel Used with S30 CO2 gas cylinders Spare washers, rubbers and 'O' ring available separatelyDoes not have a centre pin in valveNote this fitting is not suitable for use with sparklet gas bulbs
CO2 Cylinder new (S30)S30-type cylinder.PLEASE NOTE - DUE TO RESTRICTIONS FROM OUR CARRIERS THESE CYLINDERS CAN ONLY BE DELIVERED TO ENGLAND, WALES AND LOWLAND SCOTLAND. ANY ORDERS FOR ISLE OF MAN, NORTHERN IRELAND AND THE HIGHLANDS/ISLANDS OF SCOTLAND WE REGRET THAT WE CANNOT DELIVER S30 CYLINDERS.
S30 Bulb Holder With Steel Thread For 8g CO2 Bulbs-sparklets type An ideal solution to what was once a problem- insert a stainless steel thread to the inside of the plastic C02 gas bulb holder for more stability. This gas bulb holder works with all genuine Hambleton Bard S30 pin valves.Pin Valves are for use with the 8 gram(sparklets type)gas bulbs not to...
4" Barrel cap complete with Stainless Steel S30 valve 4" cap fitted with a (STAINLESS STEEL S30 VALVE) combined pressure relief and CO2 injection valve which uses the large S30 refillable CO2 cylinder for home brewing. These caps are supplied either as a black or green cap depending what the manufacturers have in stock
4" cap fitted with a (BRASS S30 VALVE) combined pressure relief and CO2 injection valve which uses the large S30 refillable CO2 cylinder for home brewing. These caps are supplied either as a black or green cap depending what the manufacturers have in stock
Syphon TapPlastic syphon tap for 8MM bore tube The tap is made from white food grade plastic for fitting to bottling or syphon tubes. Enables you to stop and start the flow without losing the syphon action when bottling or racking.The Syphon Tap is a push fit into 8mm tube used for syphoning or as part of the bottling tube.
LCD Stick-On Thermometer Easy-to-read Thermometer for Demijohns, Fermentation Bins and Barrels Very High-Quality UK made - much higher quality than cheap imports, and it will not fade. Trying to keep your wine and beer at the correct temperature while it is brewing is a vital process to make sure that it ferments correctly.