Warning: Last items in stock!
4 Item Items
A handy device for screwing up and loosening off your 4" vent cap which fits the King Keg barrel
Using this spanner provides the extra leverage that is often required to open a king keg.
The Cap spanner is designed to be used with the 4” King Keg cap. However cap spanners can also be used with a number of other 4” caps, providing the fins are aligned the same, like on the drum fermenters. The spanner helps provide extra leverage, often required to open a king keg after use. Some of our customers recommend using two spanners. This provides extra strength and rigidity. as well as being more comfortable on the hands.
No customer reviews for the moment.
Valve Washer 3mm purple for CO2 Valve The purple washer is in the centre of the image. Purple washers are the small washers that fit on the bottom of the CO2 valve. They allow CO2 into the barrel from pressurised CO2 containers like the S30 or the CO2 bulbs. Purple washers do not let any gas out the same way.
Valve Washer 8mm brown for King Keg Barrel A replacement rubber valve.This brown rubber valve is for the king keg barrel and other barrels fitted with a combined safety and inlet valve.This washer replaces the clear washer supplied with some S30 valves.
2" Standard Barrel Cap Washer - White The washer fits inside all the 2"barrel caps. It is advisable to put a small smear of petroleum jelly on the rubber to ensure a tighter seal. A flat white disc washer to fit inside all 2” barrel caps. These washers benefit from being lubricated with vaseline or similar food grade lubricant for washers.
Barrel Cap 2” with a hole for home brewing These are 2-inch barrel caps with a pre-cut hole to accommodate CO2 valves. The caps fit the standard barrels with a 2-inch neck. They can also be adapted to use as pressure kegs for a home bar.
Barrel Cap with Hole 4 inch for King Keg A king Keg 4-inch cap with a hole for the valve and an O ring. The King Keg cap 4” is the specific cap designed for King Kegs with a hole pre cut to attach either an S30 valve or pin valve. Valves not included. They can also be used on the standard drum fermenter with a 4” neck.
Tap & Back Nut for Home brew Barrels A large black lever tap with back nut. The tail is slightly longer than the standard lever tap. However, the thread fits standard barrels and drum fermenters. It is also compatible with the King Keg and King Keg float. It has a tapered, barbed spigot for connecting tubing to the tap outlet. Black Lever Tap with...
S30 Valve Stainless Steel CO2 injection and Combined pressure relief valve for use with S30 CO2 cylinders. A replacement Stainless Steel S30 Valve for King Keg and standard pressure barrels for use with Hamblebard S30 gas cylinders. An S30 valve made in stainless steel. for use with King Kegs and standard barrels. A new and improved fitting method means...
Pin Valve Stainless Steel CO2 A replacement Stainless steel valve for home brew pressure barrels using the Sparklets gas bulb system. This pin valve is a replacement valve that will work with most plastic pressure barrels A pin valve with a piercing pin which combines inlet and relief (safety) functions for single hole 2" or 4" caps. This valve takes the...
Pin Valve BRASS CO2 A replacement BRASS valve for home brew pressure barrels using the Sparklets gas bulb system. This pin valve is a replacement valve that will work with most plastic pressure barrels A pin valve with a piercing pin which combines inlet and relief (safety) functions for single hole 2" or 4" caps. This valve takes the 8-gram gas charges
King Keg Barrel Cap 4" & S30 gas valve S30 valve Used with S30 CO2 gas cylinders Spare washers, rubbers and 'O' ring available separatelyDoes not have a centre pin in valveNote this fitting is not suitable for use with sparklet gas bulbs
CO2 Cylinder new (S30) .S30 cylinder filled with natural CO2. Carbon Dioxide (CO2) cylinder, (S30) A pressurised steel cylinder which contains approximately 240g of carbon dioxide. It needs an S30 valve and does not work with the pin valve injector system.PLEASE NOTE - DUE TO RESTRICTIONS FROM OUR CARRIERS THESE CYLINDERS CAN ONLY BE DELIVERED TO...
S30 Bulb Holder With Steel Thread For 8g CO2 Bulbs-sparklets type An ideal solution to what was once a problem- insert a stainless steel thread to the inside of the plastic C02 gas bulb holder for more stability. This gas bulb holder works with all genuine Hambleton Bard S30 pin valves.Pin Valves are for use with the 8 gram(sparklets type)gas bulbs not to...
2" Barrel Cap complete with STAINLESS STEEL PIN VALVE to fit the basic barrel. This cap takes the small 8gram gas bulbs. Ideal for use with the Co2 Bulbs and bulb holder purchased separately. A 2" barrel cap with a STAINLESS STEEL PIN VALVEThis 2" diameter cap fits the basic pressure barrels. Before fitting apply a thin smear of food-grade lubricant to...
4" Barrel cap complete with Stainless Steel S30 valve 4" cap fitted with a (STAINLESS STEEL S30 VALVE) combined pressure relief and CO2 injection valve which uses the large S30 refillable CO2 cylinder for home brewing. These caps are supplied either as a black or green cap depending what the manufacturers have in stock
Syphon TapPlastic syphon tap for 8MM bore tube The tap is made from white food grade plastic for fitting to bottling or syphon tubes. Enables you to stop and start the flow without losing the syphon action when bottling or racking.The Syphon Tap is a push fit into 8mm tube used for syphoning or as part of the bottling tube.
LCD Stick-On Thermometer Easy-to-read Thermometer for Demijohns, Fermentation Bins and Barrels Very High-Quality UK made - much higher quality than cheap imports, and it will not fade. Trying to keep your wine and beer at the correct temperature while it is brewing is a vital process to make sure that it ferments correctly. The Dual Scale, Stick-on LCD...
8g CO2 Bulbs (10 bulbs) Description Disposable 8 gram CO2 bulbs. 10 bulbs per box.PLEASE NOTE THAT DUE TO RESTRICTIONS FROM OUR CARRIERS THESE CYLINDERS CAN ONLY BE DELIVERED TO ENGLAND, WALES AND LOWLAND SCOTLAND. ANY ORDERS FOR ISLE OF MAN, NORTHERN IRELAND AND THE HIGHLANDS/ISLANDS OF SCOTLAND WE REGRET THAT WE CANNOT DELIVER THESE CO2 CYLINDERS.